Template laid out
Ready for cutting
All cut and ready for final shaping tomorrow
The mini hotwire used for the rail cut
Evening Session - 12/20/2024
1 day ago
Saturday, February 28, 2009
Day 2 - Garage Built 14' Race SUP
Head High Surfing got in the way of my shaping today, so limited progress in the shaping room (a.k.a the garage). But, boy the surfing was insane. Dawn patrol netted us pure glass in thick fog and no crowds. In fact, we had the waves at the pier all to ourselves.
Template laid out
Ready for cutting
All cut and ready for final shaping tomorrow
The mini hotwire used for the rail cut
Template laid out
Ready for cutting
All cut and ready for final shaping tomorrow
The mini hotwire used for the rail cut
Subscribe to:
Post Comments (Atom)
7 comments:
DW, What is the density of that foam....and what kind of foam is that?
Dwight making your own race board? I want to walk over and see this creation? Give me a call if you have time nothing else going on today with this weather. Got some good time on Sat!
Later
The blank is 1.0 lb EPS
WP,
Too tired for a visit today.
Dwight, Are you glassing the board or sub' ing it out to a glass shop. When we made a 11' Stand Up glassing and sanding took a while and the epoxy lay ups took some time to set/harden. more so than poly.. What are the dems. Looking forward to the progress and end result Great job abd good luck. Brian was down here in HHI last week and pics to share with us? Glen
I'm doing the glassing.
Impressive!
Carpenter CV
Post a Comment